New ice‑resistant, freeze‑proof insulators have been launched, offering full‑range compatibility—suspension, post, and pin types—for high‑altitude cold‑climate power grids.

To address the challenge of ice‑induced flashover during winter in northern regions, manufacturers have applied anti‑icing coatings to the surfaces of suspension, post, pin, and crossarm insulators, while simultaneously optimizing the structure of butterfly‑type strain‑clamping assemblies to prevent snow and ice from adhering. Leveraging the inherent mechanical load‑bearing and insulation characteristics of these insulators, pilot applications have been implemented on transmission lines in high‑altitude, cold‑climate mountainous areas, effectively mitigating winter ice‑flashover tripping and enhancing the winter‑time reliability of power grids in severely cold regions.

30

2026

/

06

Foreign trade orders are growing steadily, and five types of insulators, leveraging their distinctive advantages, are being exported in bulk to overseas distribution‑network projects.

Domestically produced suspension insulators leverage their superior high‑tensile‑strength capabilities to secure overseas high‑voltage transmission projects. Column, pin, butterfly, and cross‑arm insulators are tailored to meet the needs of rural low‑voltage networks and 10 kV distribution‑network upgrades in Southeast Asia and Africa. Each product type is designed to address specific requirements—such as straight‑line stringing, tension‑anchor fixation, and integrated pole‑tower retrofitting—while delivering exceptional cost‑effectiveness and proven reliability, earning recognition from international EPC contractors.

30

2026

/

06

Progress is being made in addressing insulation hazards on aging transmission lines, with targeted replacement of insulators of the appropriate model at different locations.

In grid operation, maintenance, and repair, components are replaced according to the specific stress conditions at different pole locations: suspension insulators are swapped at straight-line suspension points; post insulators are replaced on sections prone to contamination; aged pin-type insulators are substituted on standard straight-line poles; butterfly‑type insulators are installed at guy wires and line terminations; and aging steel cross‑arms on towers are upgraded with improved cross‑arm insulators. These targeted replacements, categorized by type, enhance the overall insulation performance and operational stability of the entire transmission line.

30

2026

/

06

The iteration of composite materials is accelerating, with five major categories of new weather‑resistant insulators designed to meet the demands of complex and extreme operating conditions.

Today, suspension, post, pin, butterfly, and cross‑arm insulators are all available in silicone‑rubber composite versions. Compared with traditional porcelain products, these composites are lighter, exhibit superior hydrophobicity and moisture resistance, resist pollution‑induced flashover, and offer enhanced UV resistance, thereby reducing maintenance workload. They are increasingly being adopted in the upgrading of transmission lines in regions characterized by heavy rainfall, high humidity, smog, and saline‑alkaline coastal environments, effectively addressing the common issues of cracking, fouling, and leakage current in aging porcelain insulators.

30

2026

/

06

A Differentiated Selection Guide for Multi‑Category Insulators: Use Suspension Type for High‑Voltage Applications, and Choose Post or Pin Types as Needed for Distribution Networks.

Power line design adheres to the principle of matching insulator characteristics: suspension-type insulators are prioritized for high-voltage main lines; in areas with severe pollution, anti‑pollution post insulators are selected for distribution network upgrades; standard straight‑pole configurations in typical urban and suburban rural networks employ economical pin‑type insulators; at line termination tension points, butterfly‑type insulators are paired. For streamlined tower designs in rural areas, cross‑arm insulators are used; appropriate selection can reduce line fault rates and overall investment.

30

2026

/

06

< 1 >